Efficiently raises crystallinity of TPU/TPR/TPE and other thermoplastic materials, promoting crystal-nucleus formation, refining spherulite size for denser structure; markedly improves rigidity (flexural modulus) of TPU/TPR/TPE articles, enhancing deformation…
Photos on request
Factory photos and test reports for this grade are being prepared. Leave your requirement and we will send them first.
Model Q33 · Factory shot · Reply in 24h
Factory direct
Model · Q33
Factory direct
Functional Masterbatch & Additives
TPU Nucleating Agent
Qihao® Q33T TPU nucleating agent is a stiffness-enhancing nucleating additive specially developed for thermoplastic elastomers such as TPU…
Custom formulation
24h response
MOQ negotiable
Sample available
Reference price
MOQ25kg
160.00/ kg
Volume pricing available · Quotation within 24 hours
Configure your order
Packaging
Order quantity
Formulation
Indicative options — final terms confirmed on the quotation.
At a glance
- Model
- Q33
- Test item Property
- Typical Typical Value
- Product appearance Appearance
- PowderPowder
- Product Color Color
- whiteWhite
- Direct manufacturer
- Stable batch quality
- Reply within 24 hours
WHY IT WORKS
Why this product works
Performance and processing benefits distilled from the product datasheet.
Stiffening nucleating agent, white powder, easily and evenly dispersed in TPU/TPR/TPE without agglomeration; extremely low dosage (0.3–0.5%), economical per unit, no effect on article natural color or later coloring, purer color; broad processing applicability…
Effective at low dosage — low overall cost
APPLICATIONS
Typical applications
Suitable processes and end-use scenarios.
SPECIFICATIONS
Specifications
Key parameters from the product datasheet. Final performance is confirmed by sample testing.
Datasheet parameters
Q33
- Model
- Q33
- Test item Property
- Typical Typical Value
- Product appearance Appearance
- PowderPowder
- Product Color Color
- whiteWhite
- Density Density
- 1.01~1.1
- Category
- Functional Masterbatch & Additives
- MOQ
- From 25 kg
PRODUCT STORY
Product details
- Introduction to Materials
- Material Overview
Qihao® Q33T TPU nucleating agent is a stiffness-enhancing nucleating additive specially developed for thermoplastic elastomers such as TPU, TPR, and TPE. It has an active ingredient content of up to 99% and appears as a white powder. This product can efficiently promote crystal nucleus formation, refine spherulite size, and improve the crystallinity of the material, thereby enhancing the rigidity, deformation resistance, and heat resistance of the products, as well as improving dimensional stability. It can also accelerate the crystallization rate, shorten molding cycles, facilitate demolding, and improve production efficiency in injection molding, extrusion, film blowing, and pelletizing processes.
QiHao® Q33T TPU Nucleating Agent is a stiffness-enhancing nucleating additive specially developed for thermoplastic elastomers such as TPU/TPR/TPE, with 99% active content and white powder appearance. This product can efficiently promote nucleation, refine spherulite size, increase crystallinity, thus improving product rigidity, deformation resistance, heat resistance and dimensional stability. It also accelerates crystallization rate, shortens molding cycle, facilitates demolding, and improves production efficiency of injection molding, extrusion, blown film and compounding processes.
This product can achieve a significant stiffness-enhancing effect within the recommended addition range of 0.3-0.5%, while maintaining a good balance of strength and toughness in the material. The product is easy to disperse, does not easily agglomerate, does not affect the natural color of the product or subsequent coloration, has excellent thermal stability, and poses no risk of decomposition or precipitation under conventional processing temperatures. It can improve the surface smoothness and gloss of the product, enhancing its appearance quality.
Significant stiffness enhancement can be achieved at the recommended dosage of 0.3-0.5%, while maintaining a good balance of strength and toughness. The product is easy to disperse, not prone to agglomeration, does not affect the natural color of products or subsequent coloring, has excellent thermal stability, no risk of decomposition or precipitation at conventional processing temperatures, and can improve surface smoothness and gloss of products, enhancing appearance quality.
- Technical Parameters
- Technical Data
| Test item Property | Typical Typical Value | Module Unit | Test method Test Method |
|---|---|---|---|
| Product appearance Appearance | PowderPowder | — | Internal methodologyInternal Method |
| Product Color Color | whiteWhite | — | Internal methodologyInternal Method |
| Active Ingredient Content Active Content | 99 | % | Internal methodologyInternal Method |
| Density Density | 1.01~1.1 | g/cm³ | Internal methodologyInternal Method |
| Melt mass flow rate Melt Mass-Flow Rate (MFR) | 3~5 | g/10min | To be confirmedTo be confirmed |
| Recommended additions Recommended Dosage | 0.3~0.5 | % | — |
The above data are typical values and should not be regarded as product specification guarantees. Actual results may vary due to differences in materials, formulations, equipment, and processing conditions.
The above data are typical values and should not be regarded as guaranteed specifications. Actual results may vary depending on materials, formulations, equipment and processing conditions.
- Performance Comparison
- Performance Comparison
Qihao® Q33T
Competitor A / Competitor A
Market Conventional Product / Conventional Product
Bending Modulus Improvement Rate Higher values are better▲
Flexural Modulus Improvement Higher is better▲
- Qihao
- ® Q33T
85%
- Competitor A
- 72%
- Listings General
- 60%
Molding Cycle Reduction Rate Higher values are better▲
Molding Cycle Reduction Higher is better▲
- Qihao
- ® Q33T
20%
- Competitor A
- 15%
- Listings General
- 12%
Dispersion Higher level is better▲
Dispersion Higher grade is better▲
- Qihao
- ® Q33T
- Good
- Competitor A
- Good
- Listings General
- general
Thermal Stability Higher grade is better▲
- Qihao
- ® Q33T
- Good
- Competitor A
- Good
- Listings General
- Good
Under the same test conditions, QiHao® product demonstrates the corresponding differences in the listed properties. Refer to the comparison data above for details.Note: Grade evaluations are application assessment results, not quantitative laboratory test values.
- Apps and how-to guides
- Applications & Processing Guide
- Applicable materials:
- Compatible Materials
- TPU
- TPR
- TPE
- Typical Applications
- Typical Applications
- Injection Molded Articles
- Injection Molded Products
- Extruded product
- Extruded Products
- Blown film products
- Blown Film Products
- Granule processing
- Compounding Process
- Compatibility and dispersion
- Compatibility & Dispersion
This product has good compatibility with thermoplastic elastomers such as TPU, TPR, and TPE. At the recommended addition level, it is expected to disperse evenly, is not prone to agglomeration, and can improve the surface smoothness and gloss of products. There is no risk of decomposition or precipitation at normal processing temperatures, and it has no significant impact on the product's natural color or subsequent coloring. Users are advised to conduct small-scale tests according to actual formulations and process conditions to verify dispersion effectiveness.
This product has good compatibility with thermoplastic elastomers such as TPU/TPR/TPE. Expected to disperse uniformly at the recommended dosage with low agglomeration risk, and can improve surface smoothness and gloss of products. No decomposition or precipitation risk at conventional processing temperatures, and no obvious impact on the natural color of products or subsequent coloring. It is recommended that users conduct small trials to verify the dispersion effect according to actual formulation and process conditions.
- Methods Used
- Directions for Use
Check the packaging and drying condition of the base resin to ensure there is no moisture, contamination, or other abnormalities.
Check the packaging and drying condition of the base resin to confirm no abnormalities such as moisture or contamination.
Based on the target performance requirements, determine the initial addition ratio, with a recommended range of 0.3-0.5%.
Determine the initial dosage according to target performance requirements, recommended range is 0.3-0.5%.
Thoroughly pre-mix this product with the base resin to ensure uniform mixing.
Premix this product thoroughly with the base resin to ensure uniform mixing.
Produce according to the processing temperature and process conditions recommended for the matrix resin.
Process under the recommended temperature profile and operating conditions for the base resin.
Confirm the dispersion effect, surface appearance, mechanical properties, and dimensional stability of the product through small-scale tests.
Conduct preliminary trial to evaluate dispersion, surface appearance, mechanical properties and dimensional stability of the products.
Adjust the amount added and processing parameters according to the test results to achieve the best performance.
Fine-tune the dosage and processing parameters according to trial results to achieve optimal performance.
REQUEST A QUOTE
Request pricing and samples for Q33
Send us your base resin, processing method, target addition rate and monthly volume. Our team will reply within 24 hours.
Your details are used for quotation only.
Prefer to talk? Call 0769-83868566 or email de.qiang@qihaoplas.com · See full contact details
Reference price
¥160.00
Request quote
WECHAT
Chat with us on WeChat
Scan the QR code with WeChat to add us — instant quotes, samples and technical support.
WeChat → Scan → point at this code